Hydroclass® Ductile Iron Pipes – Water

ENQUIRE NOW

SKU-DIP35100ZN DN100

SKU-DIP35150ZN DN150

SKU-DIP35200ZN DN200

SKU-DIP35250ZN DN250

SKU-DIP35300ZN DN300

SKU-DIP35375ZN DN375

SKU-DIP35450ZN DN450

SKU-DIP35500ZN DN500

SKU-DIP35600ZN DN600

Field of use
For drinking water networks and other water networks


Main Characteristics:
AS TYT JOINT IN EPDM (PREFERABLY SUPPLIED BY HULTEC) TO AS1646 EXTERNAL COATING:
• ZINALIUM® alloy Zn85Al15 (400 g/m²)
• Blue cobalt synthetic pore sealer minimum 100 microns to AS3750.19 Internal coating:
• Blast Furnace Slag Cement mortar (BFSC) to AS3972 type GB
• If required can seal coated with Endolac 245.10 to ISO 16132 In conformance to AS/NZS 2280:2014
Water contact areas tested to AS/NZS 4020

Available Diameter Range DN100, 150, 200, 225, 250, 300, 375, 450, 500, 600
Pressure Rating PN20 – Green mark on socket face PN35 – Red mark on socket face Flange Class – Blue mark on socket face
Joints Automatic push in Tyton type rubber ring joint - DN100 to 600
Deflection DN100-250: 3.5° DN300-600: 2.5°
External Coating ZINALIUM® alloy Zn85Al15 (400 g/m²) with a Blue cobalt synthetic pore sealer top coat.
Ductile iron pipes with ZINALIUM® can be buried in direct contact with soil (No LPS) except in the following situations:
• Soils with a resistivity lower than 500 Ω.cm
• Peaty and acid soils
• Soils containing acidic industrial effluents, ashes or slag
Internal Coating Blast Furnace Cement Mortar (BFSC)
Length DN100 to DN600: L=5.75m



No content found